10 Dust Meter Manufacturers in 2023
This section provides an overview for dust meters as well as their applications and principles. Also, please take a look at the list of 10 dust meter manufacturers and their company rankings.
Table of Contents
What Is a Dust Meter?
A dust meter is a device used to measure the concentration of dust in a space. In addition to a dust meter, a particle counter is another device that measures particles in a space. The two devices are very similar, but dust meter can measure higher concentrations.
Dust meters and particle counters differ in the units of concentration they measure and display. A dust meter measures and displays mass concentrations, while particle counters measure and displays piece concentrations.
Another difference between the two instruments is the suction speed. For dust meter used to measure high concentrations, a suction rate of a few liters per minute is sufficient. Particle counters, on the other hand, are used to measure gases with relatively low particle concentrations and require higher suction volumes, with suction rates as high as 100 liters per minute.
Uses of Dust Meters
Dust meters are used to measure relatively high concentrations of dust. PM2.5 is measured in air, so a dust meters are used.
In contrast, particle counters are usually used in spaces with lower particle concentrations than dust counters. For example, they are suitable for measurement in spaces with high cleanliness, such as clean rooms in manufacturing plants in the medical, electronic materials, and food industries.
Principle of Dust Meters
A laser is generally used to detect dust. It is known that when a laser is shone on dust, if the dust is uniform, shape, color, and other properties, the intensity of the scattered light is proportional to the mass concentration of the dust. The laser dust meters measures the mass concentration of dust by converting the intensity of the scattered light into an electrical signal.
In contrast to the indirect measurement of dust concentration using a laser (relative concentration measurement method), the direct measurement of the mass of particles collected by a filter is called the direct gravimetric measurement method. Compared to measurement using filters, laser measurement has the advantages of requiring only a small amount of suction and a short measurement time. This advantage can be used to measure changes in dust concentration and distribution over time.
However, the relative concentration obtained with laser dust meters is only an indirect measurement based on the assumption that the dust properties are uniform. To confirm the validity of the concentration obtained, a comparison test with the direct gravimetric method was performed.
List of 10 Dust Meter Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- Japan
- United Kingdom
- United States of America
-
-
-
-
-
-
-
-
-
-
-
-
-
-
KANOMAX
PORTABLE DUST MONITORS
-
-
-
-
-
-
-
PerfectPrime
AQ9600 Indoor Air Quality Meter
-
-
-
-
-
Labtron Equipment Ltd.
Handheld Dust Meter LDMH-A10
-
-
Dust Meter Manufacturer Ranking
*Including some distributors, etc.Number of Employees
Newly Established Company
- PerfectPrime: 2013 (10 years ago)
- TSI: 1961 (62 years ago)
- AMETEK Land: 1947 (76 years ago)
Company with a History
- AMETEK Land: 1947 (76 years ago)
- TSI: 1961 (62 years ago)
- PerfectPrime: 2013 (10 years ago)
Lists of Dust Meters Products
3 Products are listed.
Dust densitometer Tribostatic air dust monitor
Matsushima Measure Tech Co., Ltd.The Air Dust Monitor is a dust meter that specializes in monitoring dust emissions from mechanical equipment and construction site
PM Sensor PM sensor PMS1
Shinyei Technology Co., Ltd.This is a sensor that measures particulate matter such as PM2.5, which is one of the causes of air pollution. Continuous measureme
PM Sensor PM Sensor Evaluation Set PMS-EVM-1
Shinyei Technology Co., Ltd.We have prepared an evaluation set so that you can easily use the PM sensor. LAN communication enables real-time monitoring and da
Related Products
Search from All Categories
This is the version of our website addressed to speakers of English in Canada. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.