10 Screwdriver Drill Manufacturers in 2023
This section provides an overview for screwdriver drills as well as their applications and principles. Also, please take a look at the list of 10 screwdriver drill manufacturers and their company rankings.
Table of Contents
What Is a Screwdriver Drill?
A screwdriver drill is a power tool that has a screwdriver function for tightening screws and a drill function for drilling holes.
A screwdriver drill is used in DIY projects, construction sites, furniture manufacturing, etc. Each product has various functions and features, so it is important to use the screwdriver drill that best suits the purpose of the work.
Uses of Screwdriver Drills
Screwdriver drills are used in a wide range of applications, from DIY to professional workplaces.
They are mainly used for tightening and loosening screws and fasteners and for drilling holes in materials. For example, they are used for furniture assembly and installation work and for drilling holes for screws.
Electric screwdriver drills are much more efficient than fixing screws with hand-cranked screwdrivers.
By changing the tip, it can be used for various tasks. In addition to plus and minus bits, there are square and hexagonal bits, and there are also special bits for different materials, such as for woodworking and ironworking. You can also use a socket bit for bolts and nuts.
Screwdriver drills have a clutch function that allows the torque to be adjusted according to the screw to be used.
Principle of Screwdriver Drills
Screwdriver drills insert a tip part called a bit into a part called a chuck and rotate it at high speed using electric power to tighten, loosen, or drill screws and screws. Unlike the impact driver, which hits the rotation, the driver drill only rotates.
By pulling the trigger, the chuck rotates. By changing the direction of rotation, screws and other objects can be tightened or loosened.
By changing the tip of the bit, the drill can be used for a variety of tasks.
How to Choose Screwdriver Drills
It is important to select screwdriver drills that meet your work purpose.
1. Intended use
There are two types of screwdriver drills: professional and DIY, which differ in durability and battery performance. Professional use drills are superior in all respects, but they are heavier.
2. Power Supply
There are two types of power sources: corded and rechargeable batteries. The corded type is suitable for working in the same place. Since there is no battery, it is lighter in weight.
The higher the battery voltage, the more power, but the battery is larger and heavier. Selecting the right one for the purpose of work will lead to safety and accuracy.
Rechargeable batteries are either built-in or removable cassette type.
3. Trigger
Pulling the trigger, which has a switch function, rotates the bit. Depending on the product, some have a variable speed function that changes the number of rotations by changing the degree of trigger pull, while others allow the rotation speed to be adjusted in advance.
4. Difference Between an Impact Driver and a Screwdriver Drill
Screwdriver drills are suitable for delicate work with materials, as the motor rotates only and the clutch function can be used to adjust the torque while tightening screws.
Impact drivers add a "blow" in addition to rotation. This makes them powerful and suitable for large furniture assemblies, long screws, and hard materials. They are not as suitable for delicate work as screwdriver drills.
Other Information on Screwdriver Drills
1. How to Use Screwdriver Drills
- Adjusting Torque
Adjust the torque according to the screw or other material to be used. - Installing the bit
Turn the chunk to widen it and push the bit all the way in. Turn the chunk in the opposite direction to tighten. Make sure the bit does not pull out when pulled. - Adjusting the speed
Adjust the speed of rotation with the speed change switch. Normally set to high speed, but for long screws or when drilling large holes, set to low speed. - Insert the power plug.
- Work
Place the bit perpendicular to the material and pull the trigger.
Hold the trigger slightly at first and start turning slowly. After confirming that the screw is firmly hooked, increase the rotation speed.
Select a bit that matches the size of the screw or screw to prevent damage to the groove of the screw head.
List of 10 Screwdriver Drill Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- China
- United States of America
-
-
-
Milwaukee Tool.
Screwdriver Drills
-
-
-
-
-
-
-
-
-
-
-
BLACK+DECKER Inc
Screwdriver Drills
-
-
-
-
-
Einhell Germany AG
Screwdriver Drills
-
-
-
-
-
Robert Bosch Tool Corporation
Screwdriver Drills
-
-
-
-
-
Youfu Tools Co., Ltd.
Screwdriver Drills
-
-
-
-
-
Suntec Electric Appliance Co., Ltd.
Screwdriver Drills
-
-
-
-
-
DongCheng Tools USA
Screwdriver Drills
-
-
Screwdriver Drill Manufacturer Ranking
*Including some distributors, etc.Number of Employees
Newly Established Company
- Robert Bosch Tool Corporation: 2003 (20 years ago)
- Milwaukee Tool.: 1924 (99 years ago)
- BLACK+DECKER Inc: 1910 (113 years ago)
Company with a History
- BLACK+DECKER Inc: 1910 (113 years ago)
- Milwaukee Tool.: 1924 (99 years ago)
- Robert Bosch Tool Corporation: 2003 (20 years ago)
Related Products
Search from All Categories
This is the version of our website addressed to speakers of English in Canada. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.