1. Metoree
  2. Valves
  3. Steam Traps
Description 25 Manufacturers 6 Products
Yoshitake Inc.
VYC Industrial SAU
VMV Newton
Vatac Valves.
Valves Only Europe
TLV CO., LTD.
Thermax
Thermal Energy International Inc.
Staitech Ltd
Spirax Sarco Inc.
Pennant Engineering
Omega Engineering, Inc.

25 Steam Trap Manufacturers in 2024

This section provides an overview for steam traps as well as their applications and principles. Also, please take a look at the list of 25 steam trap manufacturers and their company rankings. Here are the top-ranked steam trap companies as of April, 2024: 1.Marck & Care Engineers Ltd., 2.Staitech Ltd, 3.KOSEN VALVE CO., LTD..

Table of Contents

What Is a Steam Trap?

Steam Traps

A steam trap is a device that separates and discharges condensate (water droplets) generated within steam systems.

In factories, steam flows through pipes. When these pipes come into contact with the outside air, their surface temperature drops, causing the steam to cool and condense. If this condensate mixes with steam, it can violently collide at bends, such as elbows, leading to a condensate attack and potential damage to the piping. Erosion can also occur when condensate strikes the impellers of blowers or turbines. Installing steam traps helps avoid these issues.

Uses of Steam Traps

Steam traps are essential in piping systems where steam is utilized. By installing a steam trap, it is possible to collect condensate within the steam, thus preventing erosion and water hammering.

As steam cools and condenses, its volume significantly decreases, potentially causing a vacuum that draws condensate together, resulting in impact damage.

This can lead to severe damage to the piping and connected equipment, making the prevention capabilities of steam traps critical.

Principles of Steam Traps

Steam traps can be mechanical, thermodynamic, or thermostatic. Their operating principle varies by type.

1. Mechanical Type

The mechanical type operates simply. When condensate enters, it causes a float or bucket to rise, opening or closing the valve. This type is easy to maintain, and its operation can often be verified by sound. However, it requires regular maintenance to remove any dust accumulation on the valve to prevent continuous steam leakage.

2. Temperature Difference Type

The temperature difference type operates on the expansion and contraction caused by the temperature differential between steam and condensate. It is divided into bimetal and bellows types. The bimetal type relies on the differing expansion rates of two metals, while the bellows type uses a bellows mechanism for movement.

3. Thermodynamic Type

The thermodynamic type operates based on the pressure differences in the chamber between the primary and secondary sides. The valve opens as the high-temperature condensate expands the bimetal, allowing condensate discharge. Once the steam flows, the pressure drop causes the valve to close, repeating the cycle as needed.

Types of Steam Traps

1. Mechanical Type

Mechanical steam traps, utilizing the specific gravity difference between steam and condensate, are categorized into bucket and float types. The bucket type includes inverted bucket (I.B. type) and standard bucket types, while the float type includes designs with levers.

2. Temperature Difference Type

The thermostatic steam trap, or thermal differential type, operates on the temperature difference between steam and condensate. It includes bimetal and bellows types.

3. Thermodynamic Type

The thermodynamic steam trap utilizes the thermodynamic properties difference between steam and condensate, further classified into disc type and external air-cooled types.

How to Choose a Steam Trap

1. Mechanical Type

The mechanical type, offering no condensate retention and featuring an energy-saving design, includes the scale-resistant bucket type and the quick-warming, pressure-difference-resistant float type. However, the mechanical type may be susceptible to freezing and is relatively large. The float type is vulnerable to water hammer, and the bucket type's installation direction may be restricted.

2. Temperature Difference Type

The thermostatic type is quiet and water hammer resistant. It allows for controlled condensate discharge temperature and features good low-noise air discharge performance. However, due to its lower-than-saturated steam temperature operation, condensate may accumulate, leading to delayed valve closing and steam loss. The bimetal parts are prone to corrosion and fatigue, affecting durability.

3. Thermodynamic Type

Compact and lightweight, the thermodynamic type is resistant to freezing and can be installed in any direction. However, it is sensitive to external temperatures, which may lead to dry hitting and potential condensate retention issues.

List of 25 Steam Trap Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Canada
  • China
  • India
  • Japan
  • South Africa
  • Spain
  • United Kingdom
    • Omega Engineering, Inc.
      • United States of America Address: 800 Connecticut Ave. Suite 5N01, Norwalk, Connecticut, United States of America

      Manufacturer Overview

      OMEGA Engineering Inc., founded in Norwalk, CT, in 1962 is a manufacturer of products used to measure temperature and humidity, flow and level, and pressure. The company's product portfolio includes thermocouple probes and assemblies, pressure gauges and switches, and air velocity measurement systems, wireless systems and portable optic sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company also offers customer services that include support, custom research projects and customized services.

    • Fabricast.Inc
      • United States of America Address: 2511 Seaman Avenue South El Monte, California, United States of America

      Manufacturer Overview

      Fabricast Inc. is a manufacturer of slip ring assemblies that is headquartered in South El Monte, California, and was founded in 1960. The company began with electrical slip rings which later became diverse into a product catalog of stock slip rings, slip ring brushes, and custom slip rings. The stock slip rings cater to diverse applications but are applied generally in power and instrumentation. Slip ring brushes are used in noise instrumentation and power applications. Custom slip rings are dependent on end-user requirements.

    • DSTI
      • United States of America Address: 13829 Jay Street NW Andover, Minnesota, United States of America

      Manufacturer Overview

      DSTI or Dynamic Sealing Technologies, Inc. is situated in Andover, MN, and is a supplier of engineered fluid sealing and transfer solutions for rotating applications to a wide range of global industries. The company offers Rotary Unions, Electrical Slip Rings, Custom Solutions, and more. The company functions for industries like aerospace, alternative energy, defense, factory automation, food & beverages, and a lot more. The company is accredited with the ISO 9001.2015 certificate. The company is also Honored as a 2023 Top Workplace by the Star Tribune for the Fifth Year in a Row.

    • Canadian Solar
      • Canada Address: 545 Speedvale Avenue West Guelph, Ontario, Canada

      Manufacturer Overview

      Canadian Solar, headquartered in Guelph, Ontario, is a manufacturer of solar energy products founded in 2001. Their product line includes solar modules, solar power systems, inverters, and data monitoring products such as CSI Cloud Apps and WiFi sticks. These products are designed to harness sunlight and convert it into electrical energy, catering to utility-scale solar projects. Canadian Solar also provides end-to-end services, from feasibility study to maintenance, reducing complexity and costs for industrial and commercial projects.

    • TLV CO., LTD.
      • Japan Address: 881 Nagasuna, Noguchi, Kakogawa, Hyogo, Japan

      Manufacturer Overview

      TLV, established in 1950, is a Japan-based manufacturer and supplier of steam engineering products such as fluid control equipment, system products, and maintenance instruments. The company offers fluid control equipment including cyclone separators, steam traps, automatic check valves, manifolds, and pressure-reducing valves used for steam, air, and water piping. The company offers maintenance instruments such as pocket trapman. The company also offers consultation, engineering, services, and the design and construction of steam and power systems. TLV has achieved ISO9001 and ISO 14001 certifications for standardization allowing their products to be used in logistics, building maintenance, chemicals, refineries, and petrochemical industries.

    • MIYAWAKI Inc.
      • Japan Address: Tagawakita 2-1-30, Yodogawa-ku, Osaka, Osaka, Japan

      Manufacturer Overview

      MIYAWAKI Inc., founded in 1933 in Osaka, Japan, is a developer and manufacturer of steam traps and related products for industrial applications. The company's product line includes industrial valve products, such as steam traps, pressure-reducing valves, water mixing valves, air vents, air traps, and ancillary equipment. The company manufactures all kinds of steam traps ranging from the conventional thermostatic, thermodynamic, ball float, and inverted bucket steam traps to the more advanced self-actuating, temperature control steam traps. The company has obtained several certifications, including the ISO 9001:2000 certification, and complies with the Pressure Equipment Directive 2014/68/EU.

    • Marck & Care Engineers Ltd.
      • India Address: No. 8 - 9, Third Floor, 59, Rani Jhansi Road Jhandewalan Mandir, New Delhi, Delhi, India

      Manufacturer Overview

      Marck & Care Engineers Ltd., founded in 1999 and located in New Delhi, Delhi, India, is a manufacturer, exporter, and supplier of industrial valves, sight glasses, automotive strainers, and steam traps. The company’s product catalog includes thermodynamic steam traps, industrial valves and valve fittings, butterfly valves, ball valves, and industrial pipe and tube fittings. Others are knife gate valves, globe valves, lined valves, gate and sluice valves, and pipeline accessories. These valves are used in industries, such as pharmaceutical, petrochemical, oil and gas, food and beverage, and more.

    • KOSEN VALVE CO., LTD.
      • China Address: Dongou Industrial Zone, Oubei, Wenzhou, Zhejiang, China

      Manufacturer Overview

      KOSEN VALVE CO. LTD., established in 2000 and based at Dongou Industrial Zone, Oubei town, is an ISO 9001:2000-certified manufacturer and supplier of valves for institutional and commercial applications. The company offers steam traps, gate valves, globe valves, check valves, and butterfly valves. It also supplies manual, electric, pneumatic, and spur bevel gear-operated options. These products are applicable for institutional or commercial freezing, air conditioning, refrigerant injection, and refrigeration circuits. Other industries targeted include thermal power stations, chemicals, petroleum, mining, and machinery. The company also offers technical training to customers to help them with operation, maintenance, and other requurements.

    • NTGD Valve (China) Co. LTD
      • China Address: North Avenue Zhuqu Town ,Weishi County, Kaifeng, Henan, China

      Manufacturer Overview

      NTGD Valve (China) Co., Ltd. is a manufacturer and supplier of industrial valves that was established in 1991 and is headquartered in Kaifeng, Henan, China. The company produces a wide range of valves, including ball valves, gate valves, globe valves, check valves, and butterfly valves. Its products, such as Forged Ball Valves, Flange Globe Valves, Wedge Gate valves, Lubricated Plug Valves, Dual Plate Check Valves, and Swing Check Valves, are used by a number of industries, as diverse as oil and gas, power generation, and water treatment industries.

    • Hawa Engineers Ltd
      • India Address: Plot No: 129,B/h. Kashiram Textile Mill, Narol Road, Ahmedabad, Gujarat, India

      Manufacturer Overview

      Hawa Engineers Ltd, founded in 1993 and located in Ahmedabad, Gujarat, India, is an ISO 9001: 2015 certified manufacturer and supplier of a wide range of industrial valves and related accessories. The company offers steam traps, butterfly valves, check valves, ball valves, and cast iron air valves. Other products include industrial valves such as globe valves, gate valves, pneumatic valves, strainers, and EIL-approved flanges. The company offers these products to several industries, including chemical, water treatment, refinery, mining, and food and beverage, among other sectors.

    • MAHAVAS PRECISION CONTROLS Pvt. Ltd.
      • India Address: 115/2/1, General Block, MIDC, Bhosari, Pune, Maharashtra, India

      Manufacturer Overview

      MAHAVAS PRECISION CONTROLS Pvt. Ltd., founded in 1992 and located at Pune (Maharashtra, India), is a manufacturer and supplier of steam straps, control valves, safety valves, and related products. The company offers various products and services, including flash steam separators, ball float steam traps, pressure relief safety valves, pressure reducing valves, and condenser recovery systems. The company has obtained the ISO 9001:2015 certification for quality, allowing its products to be safely used in industries such as building maintenance, chemicals, petrochemicals, paper and pulp, and more.

    • Thermax
      • India Address: Thermax Limited Thermax House, 14 Mumbai-Pune Road Wakdewadi, Pune, Maharashtra, India

      Manufacturer Overview

      Thermax Group, established in 1966 in Pune, India, is a manufacturer and supplier of energy and environment solutions. The company offers a wide range of products and services, including boilers, heaters, chillers, and waste heat recovery systems. These solutions are used in industries such as power, chemicals, pharmaceuticals, and more. Thermax's products ensure sustainable energy and resource management, helping industries optimize their processes while minimizing environmental impact. Additionally, the company aims to provide cutting-edge solutions that address the complex challenges of energy efficiency and environmental conservation.

    • VYC Industrial SAU
      • Spain Address: Avenc del Daví, 22 Pol. Ind. Can Petit Terrassa , Barcelona, Spain

      Manufacturer Overview

      VYC Industrial SAU, established in 1914 in Terrassa, Catalonia, Spain, is a manufacturer and global supplier of all kinds of air extraction, air conditioning, and cooling systems. The company designs, manufactures, and supplies valves for fluid control and interception. It also offers steam boilers, steep traps, and air conditioning systems for industrial applications. These solutions are widely used in various industries, including food processing, food and beverage, pharmaceuticals, chemicals, paper, and more. The company operates in over 80 countries on five continents.

    • Spirax Sarco Inc.

      Manufacturer Overview

      Spirax Sarco is a manufacturer and supplier of steam system solutions, providing products and services to industries, including food and beverage, pharmaceuticals, chemicals, and more. The company was established in the UK in 1888 and has since expanded to over 60 countries worldwide, with its US headquarters based in Blythewood, South Carolina. One of their products is the TD62 Thermodynamic Steam Trap, which offers high efficiency and reliability for condensate removal in steam systems. They received awards like 2019 Innovation Award from the Institute of Chemical Engineers (IChemE) for their EasiHeat engineered system.

    • GESTRA AG

      Manufacturer Overview

      GESTRA AG is headquartered in Bremen, Germany, since 1902 as a designer and manufacturer of valve and control systems. The company deals in boiler controls, steam traps, isolation, and control valves. It also offers check valves, strainers, and service control valves. The products have multiple applications in general manufacturing, chemical, power generation, boiler manufacturing, and oil & gas industries. The products are also essential in maximizing system efficiency and minimizing water consumption in the pulp and paper market. Its services include system auditing, project engineering, steam trap surveys, and automatic broiler control.

    • Yoshitake Inc.
      • Japan Address: 2-27-1, Gokiso-tori, Showa-ku, Nagoya, Aichi, Japan

      Company Overview

      Yoshitake Inc., established in 1937, and based in Aichi, Japan, is a manufacturer and supplier of valves central to piping design. The company product portfolio includes pressure-reducing valve/drain separators, manual valves, safety and relief valves and hot water navigators, among others. The manufactured valves find extensive use in industries such as construction, production equipment, mechanical systems, and other sectors. The company also offers piping design consultation, energy-saving surveys and optimization of production facilities. Yoshitake offers globally compliant, certified products, backed by a global network of distributors to serve clients internationally.

    • Staitech Ltd
      • United Kingdom Address: Unit 6, Canal Iron Works Hope Mill Lane, Brimscombe Stroud, Gloucestershire, United Kingdom

      Company Overview

      Staitech Ltd, founded in 1997 and headquartered in Stroud, Gloucestershire, UK, is a manufacturer, supplier, and distributor of high-purity system products for use in the biotechnology and pharmaceutical industries. The company's core products include steam traps, sample coolers, sample valves, non-return valves, and sight glasses. A machining service for C22 alloy and stainless steel parts is also available. The company also distributes certain products from various manufacturers such as Steridose, Steriflow, Exergy, Maddison, and Wika.

    • DELTA STEAM SYSTEMS
      • South Africa Address: 11 River’s Edge Business Park, Winelands Close, Bellville, Cape Town, Western Cape, South Africa

      Company Overview

      DELTA STEAM SYSTEMS, founded in 2008 and located in Cape Town, South Africa, is a manufacturer and supplier of steam traps and other metal products. The company’s products include steam straps, venturi steam traps, and venturi orifice steam traps. Industries served include food and beverage, chemicals, packaging, timber, and oil refineries, among others. The company supplies its products to customers in Africa through a well-established distributor network and exports its products to countries such as Thailand, Saudi Arabia, Germany, New Zealand, and the United States.

    • Vatac Valves.

      Company Overview

      Vatac Valves Wenzhou Corp, established in 1987 and headquartered in Wenzhou, Zhejiang, China, is a global manufacturer and supplier of industrial valve solutions. It offers an extensive line of materials, from conventional steel to special alloys such as Monel, Inconel, Hastelloy, and Duplex steel. Its product portfolio comprises ball valves, gate valves, globe valves, butterfly valves, and through conduit gate valves, adhering strictly to international standards like API, ASTM, ANSI, and ISO. The company holds CE certification and ISO 9001:2000 quality management system accreditation and operates within vast manufacturing facilities spanning over 500,000 square feet.

    • Pennant Engineering

      Company Overview

      Pennant Engineering, established in 1985 with locations in the US and India, is an ISO 9001:2008-certified manufacturer of steam traps, pipeline accessories, flow control systems, engineered steam solutions, and other products for the steam and hydronics industries. These solutions are also utilized in various industries, including chemicals, pharmaceuticals, engineering, and power generation. The company exports to over 30 countries worldwide with an extensive distributor network in North America, South America, Africa, and Southeast Asia.

    • Armstrong International Inc.

      Company Overview

      Armstrong International Inc., founded in 1900 and based in Three Rivers, Michigan, is a multi-national manufacturer of thermal utility solutions such as heat transfer coils, heat pumps, and steam products. It provides custom services to companies in various industries, including hospitality, healthcare, and higher education, and a majority of its international facilities have ISO 9001 certification. The products also conform to the Pressure Equipment Directive (PED) requirements of 2014. In 1996, it pivoted from manufacturing and added thermal energy engineering services, and in 2005, it received trading approval from the United Nations’ UNFCCC for its steam system methodology.

    • LAKESIDE PROCESS CONTROLS
      • Canada Address: 2475 Hogan Drive, Mississauga, Ontario, Canada

      Distributor Overview

      Lakeside Process Controls Ltd., established in 1988 and located in Mississauga, Ontario, Canada, is a wholesale distributor of industrial machinery and equipment. The company's core offerings include densitometers and viscometers, pneumatics and solenoids, control valves and regulators, steam straps, and industrial AC drives. The company also offers professional services such as engineering, project management, valve and mechanical operation, control system solutions, and instrumentation field services. Industries catered to include chemicals, water and wastewater, power generation, food and beverage, life science, and more.

    • Thermal Energy International Inc.

      Distributor Overview

      Thermal Energy International Inc., established in 1991 and headquartered in Ottawa, Canada, is a supplier of institutional, commercial, and industrial energy efficiency and carbon emission reduction solutions. The company designs, manufactures, and supplies technology lines, including condensate return systems and heat recovery solutions. Its product line includes GEM steam traps, DRY-REX biomass dryers, FLU-ACE heat recovery systems, and Turnkey thermal energy solutions. The company has locations in Canada, the UK, France, Germany, Poland, and other parts of the world.

Steam Trap Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the steam trap page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. TLV CO., LTD.: 500
  2. Yoshitake Inc.: 466
  3. MIYAWAKI Inc.: 140

Newly Established Company

  1. DELTA STEAM SYSTEMS: 2008 (16 years ago)
  2. Valves Only Europe: 2003 (21 years ago)
  3. DSTI: 2002 (22 years ago)

Company with a History

  1. GESTRA AG: 1902 (122 years ago)
  2. VYC Industrial SAU: 1914 (110 years ago)
  3. MIYAWAKI Inc.: 1933 (91 years ago)

Steam Trap Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Steam Trap Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
United States of America United States of America 4 21.1%
India India 4 21.1%
Japan Japan 3 15.8%
China China 3 15.8%
Canada Canada 2 10.5%
Spain Spain 1 5.3%
United Kingdom United Kingdom 1 5.3%
South Africa South Africa 1 5.3%

List of Steam Trap Products

6 products are listed.

Large energy -saving effect pinchis team trap by reducing steam loss-Kansai Autome Equipment

Kansai Autome Equipment

Large energy -saving effect pinchis team trap by reducing steam loss

10+ people viewing

･ Reliable energy -saving effect that does not leak raw steam. ･ High durability, no drive part, it does not break (no breakdown for 8 years or mo...


6 models listed

Related Products

Relief Valves
Shuttle Valves
Plastic Valves
Counterbalance Valves
Solenoid Valves
Booster Valves (Air Boosters)
Air Release Valves
Mixing Valves
Angle Valves
Exhaust Valves
Sequence Valves
Needle Valves
Sanitary Valves
Directional Control Valves
Butterfly Valves
Hydraulic Valves

Search from All Categories

1201 Sensors
1203 Test Equipment
1204 Motors
1205 Pumps
1206 Relays
1207 Testing Equipment
1208 Analyzers
1209 Diodes
1210 Measuring Equipment
1211 Observation Equipment
1212 Printers
1213 Capacitors
1214 Switches
1215 Robots
1216 Cameras
1217 Connectors
1218 Meters & Instruments
1219 Generators
1220 Light Sources
1221 Power Supplies
1222 FA Equipment
1223 Machining / Machine Tools
1224 Boards & Circuit Boards
1225 Transformers
1226 Integrated Circuits
1227 Cables
1228 Transistors
1229 Controllers
1230 Electromagnetic Countermeasures
1231 Surge Countermeasures
1232 Drive Mechanisms & Components
1233 Scanners
1234 Servers
1235 Magnetic Materials
1236 Amplifiers
1237 Semiconductor Manufacturing
1238 Metallic Materials
1239 Terminals / Interfaces
1240 Temperature Control
1241 Fastening Components
1242 Network-related Equipment
1243 Development & Design
1244 Safety Devices
1245 Input & Display Devices
1246 Polymeric Materials
1247 Optical Components
1248 Purification Equipment
1249 Storage Devices
1250 Fixtures
1251 Heat Sources
1252 Sealing Devices
1253 Storage Products
1255 Fittings
1256 Valves
1257 Gloves
1258 Sanitary
1259 Springs
1260 Conveyors
1261 Resistance / Load
1262 Filters
1264 Converters & Transducers
1267 Cleaning Agents & Equipment
1269 Protective Materials & Equipment
1270 Hoses / Tubes
1271 Clean Room Supplies
1273 Clamps & Fasteners
1274 Adhesives & Repair Materials
1278 Analysis Software
1279 Stages
1280 Freezers
1281 Terminals
1283 Nozzles
1284 Cooling Equipment
1285 Bio
1286 Separation and Extraction Equipment
1287 Lubricator-related Equipment
1288 Business Efficiency Systems / Software
1290 Coils
1291 Paints
1292 Inorganic & Mineral Materials
1293 Dryers
1294 Blowers
1295 Agitators
1296 Weighing Equipment
1298 Packing Materials
1299 Processing Services
1300 Testing Services
1301 Tools
1302 Elements
1303 Chemicals
1304 Pesticides
1305 Building Materials
1306 Agricultural Materials
1307 Painting Services
1308 Vehicle related
1309 Construction Machinery
1310 Ship related
1311 Aircraft
1312 Transport Vehicles
1313 Global Environment

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree