This section provides an overview for gps chips as well as their applications and principles. Also, please take a look at the list of 3 gps chip manufacturers and their company rankings.
Table of Contents
A GPS chip is a chip that is connected to or contains a GPS antenna that receives signals from GPS satellites and incorporates circuitry to calculate the current position.
GPS is an abbreviation for global positioning system, which determine a person's location on the earth by communicating with positioning satellites operated by the U.S. Department of Defense. A GPS chip is being actively developed for higher precision, smaller size, and higher performance.
Currently, in addition to the GPS satellites, the GNSS (Global Navigation Satelite System), which refers to the four satellite systems of Russia's GLONASS, EU's Galileo, and China's Beidou, as well as signals from India's GAGAN and Japan's MICHIBIKI, etc., are also supported.
GPS was originally developed for military applications, such as guided missiles, but it has been opened up for civilian use and is now used to support navigation for ships and aircraft.
GPS chips have been developed and miniaturized, and are now used in portable devices such as car navigation systems, smartphones, and tablets. This enables map applications to provide navigation to current locations and destinations.
It is also used in wearable devices such as smartwatches as GPS loggers to check distance traveled, number of steps taken, and travel history. In addition to these, development for applications in the space business, etc., is also underway.
GPS satellites contain a very precise clock (atomic clock) based on the frequencies of the spectral lines of atoms and molecules, and the signals emitted from GPS satellites mainly transmit this precise time and location information.
The distance from the GPS satellite can be calculated by multiplying the time of arrival of the signal from the GPS to the GPS chips by the speed of light. In other words, we can determine where the GPS chips are located on a sphere whose radius is the distance at that time.
This is done with multiple satellites, and the point where the spheres from all satellites intersect is identified as the current location. The more satellites received, the more accurate the location can be identified.
The satellites are equipped with atomic clocks and can transmit very accurate time, but the receiving GPS chips do not have an atomic clock. The receiving side is equipped with a common quartz clock, but it cannot be as accurate as an atomic clock, so it must receive from at least four satellites and correct the time by using the four variables x, y, z, and t.
Light travels about 185 000 mi per second, so even a 10 millionth of a second error results in an error of 98 ft. In addition to these errors due to time information, there are errors due to satellite positioning information, errors due to the ionosphere and moisture in the atmosphere, errors due to reflections from buildings and mountains, errors due to the small number of satellites that can receive the data, and other errors.
The miniaturization of GPS chips has made it possible to mount them on the following devices.
A general-purpose GPS chips device about the size of a coin that can be attached to a variety of objects to transmit location information. It is small and lightweight (1" x 1", 0.5oz) and can be purchased for around 20 dollars.
As GPS modules have become smaller and less expensive, GPS-equipped drones have also become popular. Even models equipped with 4K high-angle HD cameras can now be purchased for the low 75 dollar range at major online retailers.
*Including some distributors, etc.
Sort by Features
Sort by Area
Number of Employees
Newly Established Company
Company with a History
This is the version of our website addressed to speakers of English in Canada. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.